Processess Intro

terminology

process

A processprocess is compiled source code that is currently running on the system.

PID

All processes have a process idprocess id or PIDPID.

PPID

Every process has a parent process (with a PPIDPPID). The child process is often started by the parent process.

init

The initinit process always has process ID 1. The init process is started by the kernel itself so technically it does not have a parent process. init serves as a foster parent for orphaned processes.

kill

When a process stops running, the process dies, when you want a process to die, you killkill(1) it.

daemon

Processes that start at system startup and keep running forever are called daemondaemon processes or daemons. These daemons never die.

zombie

When a process is killed, but it still shows up on the system, then the process is referred to as zombiezombie. You cannot kill zombies, because they are already dead.

basic process management

$$ and $PPID

Some shell environment variables contain information about processes. The $$$$ variable will hold your current process ID, and $PPID$PPID contains the parent PID. Actually $$ is a shell parameter and not a variable, you cannot assign a value to it.

Below we use echoecho(1) to display the values of $$ and $PPID.

[paul@RHEL4b ~]$ echo $$ $PPID
4224 4223

pidof

You can find all process id\'s by name using the pidofpidof(1) command.

root@rhel53 ~# pidof mingetty
2819 2798 2797 2796 2795 2794

parent and child

Processes have a parent-child relationship. Every process has a parent process.

When starting a new bash you can use echo to verify that the pid from before is the ppid of the new shell. The child process from above is now the parent process.

[paul@RHEL4b ~]$ bash
[paul@RHEL4b ~]$ echo $$ $PPID
4812 4224

Typing exit will end the current process and brings us back to our original values for $$ and $PPID.

[paul@RHEL4b ~]$ echo $$ $PPID
4812 4224
[paul@RHEL4b ~]$ exit
exit
[paul@RHEL4b ~]$ echo $$ $PPID
4224 4223
[paul@RHEL4b ~]$

fork and exec

A process starts another process in two phases. First the process creates a forkfork of itself, an identical copy. Then the forked process executes an execexec to replace the forked process with the target child process.

[paul@RHEL4b ~]$ echo $$
4224
[paul@RHEL4b ~]$ bash
[paul@RHEL4b ~]$ echo $$ $PPID
5310 4224
[paul@RHEL4b ~]$

exec

With the exec command, you can execute a process without forking a new process. In the following screenshot a Korn shell (ksh) is started and is being replaced with a bash shell using the exec command. The pid of the bash shell is the same as the pid of the Korn shell. Exiting the child bash shell will get me back to the parent bash, not to the Korn shell (which does not exist anymore).

[paul@RHEL4b ~]$ echo $$
4224                                # PID of bash
[paul@RHEL4b ~]$ ksh
$ echo $$ $PPID
5343 4224                           # PID of ksh and bash
$ exec bash
[paul@RHEL4b ~]$ echo $$ $PPID
5343 4224                           # PID of bash and bash
[paul@RHEL4b ~]$ exit
exit
[paul@RHEL4b ~]$ echo $$
4224

ps

One of the most common tools on Linux to look at processes is psps. The following screenshot shows the parent child relationship between three bash processes.

[paul@RHEL4b ~]$ echo $$ $PPID
4224 4223
[paul@RHEL4b ~]$ bash
[paul@RHEL4b ~]$ echo $$ $PPID
4866 4224
[paul@RHEL4b ~]$ bash
[paul@RHEL4b ~]$ echo $$ $PPID
4884 4866
[paul@RHEL4b ~]$ ps fx
  PID TTY      STAT   TIME COMMAND
 4223 ?        S      0:01 sshd: paul@pts/0 
 4224 pts/0    Ss     0:00  \_ -bash
 4866 pts/0    S      0:00      \_ bash
 4884 pts/0    S      0:00          \_ bash
 4902 pts/0    R+     0:00              \_ ps fx
[paul@RHEL4b ~]$ exit
exit
[paul@RHEL4b ~]$ ps fx
  PID TTY      STAT   TIME COMMAND
 4223 ?        S      0:01 sshd: paul@pts/0 
 4224 pts/0    Ss     0:00  \_ -bash
 4866 pts/0    S      0:00      \_ bash
 4903 pts/0    R+     0:00          \_ ps fx
[paul@RHEL4b ~]$ exit
exit
[paul@RHEL4b ~]$ ps fx
  PID TTY      STAT   TIME COMMAND
 4223 ?        S      0:01 sshd: paul@pts/0 
 4224 pts/0    Ss     0:00  \_ -bash
 4904 pts/0    R+     0:00      \_ ps fx
[paul@RHEL4b ~]$

On Linux, ps faxps fax is often used. On Solaris ps -efps -ef (which also works on Linux) is common. Here is a partial output from ps fax.

[paul@RHEL4a ~]$ ps fax
PID TTY      STAT   TIME COMMAND
1 ?        S      0:00 init [5]

...

3713 ?        Ss     0:00 /usr/sbin/sshd
5042 ?        Ss     0:00  \_ sshd: paul [priv]
5044 ?        S      0:00      \_ sshd: paul@pts/1 
5045 pts/1    Ss     0:00          \_ -bash
5077 pts/1    R+     0:00              \_ ps fax

pgrep

Similar to the ps -C, you can also use pgreppgrep(1) to search for a process by its command name.

[paul@RHEL5 ~]$ sleep 1000 &
[1] 32558
[paul@RHEL5 ~]$ pgrep sleep
32558
[paul@RHEL5 ~]$ ps -C sleep
  PID TTY          TIME CMD
32558 pts/3    00:00:00 sleep

You can also list the command name of the process with pgrep.

paul@laika:~$ pgrep -l sleep
9661 sleep

top

Another popular tool on Linux is toptop(1). The top tool can order processes according to cpu usage or other properties. You can also kill processes from within top. Press h inside top for help.

In case of trouble, top is often the first tool to fire up, since it also provides you memory and swap space information.

signalling processes

kill

The killkill(1) command will kill (or stop) a process. The screenshot shows how to use a standard kill to stop the process with pid 1942.

paul@ubuntu910:~$ kill 1942
paul@ubuntu910:~$

By using the kill we are sending a signal to the process.

list signals

Running processes can receive signals from each other or from the users. You can have a list of signals by typing kill -lkill(1), that is a letter l, not the number 1.

[paul@RHEL4a ~]$ kill -l
1) SIGHUP       2) SIGINT       3) SIGQUIT      4) SIGILL
5) SIGTRAP      6) SIGABRT      7) SIGBUS       8) SIGFPE
9) SIGKILL     10) SIGUSR1     11) SIGSEGV     12) SIGUSR2
13) SIGPIPE     14) SIGALRM     15) SIGTERM     17) SIGCHLD
18) SIGCONT     19) SIGSTOP     20) SIGTSTP     21) SIGTTIN
22) SIGTTOU     23) SIGURG      24) SIGXCPU     25) SIGXFSZ
26) SIGVTALRM   27) SIGPROF     28) SIGWINCH    29) SIGIO
30) SIGPWR      31) SIGSYS      34) SIGRTMIN    35) SIGRTMIN+1
36) SIGRTMIN+2  37) SIGRTMIN+3  38) SIGRTMIN+4  39) SIGRTMIN+5
40) SIGRTMIN+6  41) SIGRTMIN+7  42) SIGRTMIN+8  43) SIGRTMIN+9
44) SIGRTMIN+10 45) SIGRTMIN+11 46) SIGRTMIN+12 47) SIGRTMIN+13
48) SIGRTMIN+14 49) SIGRTMIN+15 50) SIGRTMAX-14 51) SIGRTMAX-13
52) SIGRTMAX-12 53) SIGRTMAX-11 54) SIGRTMAX-10 55) SIGRTMAX-9
56) SIGRTMAX-8  57) SIGRTMAX-7  58) SIGRTMAX-6  59) SIGRTMAX-5
60) SIGRTMAX-4  61) SIGRTMAX-3  62) SIGRTMAX-2  63) SIGRTMAX-1
64) SIGRTMAX
[paul@RHEL4a ~]$

kill -1 (SIGHUP)

It is common on Linux to use the first signal SIGHUPSIGHUP (or HUP or 1) to tell a process that it should re-read its configuration file. Thus, the kill -1 1 command forces the init process (init always runs with pid 1) to re-read its configuration file.

root@deb503:~# kill -1 1
root@deb503:~#

It is up to the developer of the process to decide whether the process can do this running, or whether it needs to stop and start. It is up to the user to read the documentation of the program.

kill -15 (SIGTERM)

The SIGTERM signal is also called a standard kill. Whenever kill is executed without specifying the signal, a kill -15 is assumed.

Both commands in the screenshot below are identical.

paul@ubuntu910:~$ kill 1942
paul@ubuntu910:~$ kill -15 1942

kill -9 (SIGKILL)

The SIGKILL is different from most other signals in that it is not being sent to the process, but to the Linux kernel. A kill -9 is also called a sure kill. The kernel will shoot down the process. As a developer you have no means to intercept a kill -9 signal.

root@rhel53 ~# kill -9 3342

SIGSTOP and SIGCONT

A running process can be suspended when it receives a SIGSTOP signal. This is the same as kill -19 on Linux, but might have a different number in other Unix systems.

A suspended process does not use any cpu cycles, but it stays in memory and can be re-animated with a SIGCONT signal (kill -18 on Linux).

Both signals will be used in the section about background processes.

pkill

You can use the pkillpkill(1) command to kill a process by its command name.

[paul@RHEL5 ~]$ sleep 1000 &
[1] 30203
[paul@RHEL5 ~]$ pkill sleep
[1]+  Terminated              sleep 1000
[paul@RHEL5 ~]$

killall

The killallkillall(1) command will send a signal 15SIGTERM to all processes with a certain name.

paul@rhel65:~$ sleep 8472 &
[1] 18780
paul@rhel65:~$ sleep 1201 &
[2] 18781
paul@rhel65:~$ jobs
[1]-  Running                 sleep 8472 &
[2]+  Running                 sleep 1201 &
paul@rhel65:~$ killall sleep
[1]-  Terminated              sleep 8472
[2]+  Terminated              sleep 1201
paul@rhel65:~$ jobs
paul@rhel65:~$

killall5

Its SysV counterpart killall5 can by used when shutting down the system. This screenshot shows how Red Hat Enterprise Linux 5.3 uses killall5 when halting the system.

root@rhel53 ~# grep killall /etc/init.d/halt
action $"Sending all processes the TERM signal..." /sbin/killall5 -15
action $"Sending all processes the KILL signal..."  /sbin/killall5 -9

top

Inside toptop the k key allows you to select a signal and pid to kill. Below is a partial screenshot of the line just below the summary in top after pressing k.

PID to kill: 1932

Kill PID 1932 with signal [15]: 9

practice : basic process management

1. Use ps to search for the init process by name.

2. What is the process id of the init process ?

3. Use the who am i command to determine your terminal name.

4. Using your terminal name from above, use ps to find all processes associated with your terminal.

5. What is the process id of your shell ?

6. What is the parent process id of your shell ?

7. Start two instances of the sleep 3342 in background.

8. Locate the process id of all sleep commands.

9. Display only those two sleep processes in top. Then quit top.

10. Use a standard kill to kill one of the sleep processes.

11. Use one command to kill all sleep processes. solution : basic process management ===================================